Ps3 Controller Address

1. How To Check Ps3 Controller Bluetooth Address
2. Ps3 Controller Mac Address
3. Ps3 Controller Address Change
4. Ps3 Controller Address Labels

Summary :

Nowadays, there are still a lot of people using PS3 controller. That's still no reason to ditch your PS3 console or throw out your controllers quite yet. In this post, MiniTool shows you how to connect PS3 controller to PC.

To use the controller on your PS3 again, simply connect it to your PS3 System using a USB cable, then Bluetooth address will be changed back. Note: To use it on your Phone or tablet again you'll need to change the address manually again. If the PS3 system doesn't connect the controller properly, reset the controller using the reset button on.

1. I'd be remiss if I didn't address the elephant in the room, though: Bluetooth can be. Just do a Google search for 'retropie ps3 controller' and you'll come across pages of results showing RetroPie users who just can't seem to connect their PS3 controllers to their Raspberry Pi. Personally, I didn't have any issues.
2. Before we get started, it's important to understand that a controller paired with a PS3 console has the Bluetooth MAC address of the console stored. Consequently, this is the only device to which the controller will connect.
3. The Playstation 3's controller, the Dualshock 3, isn't the easiest pad to get working on the PC. So why bother when it's so much easier to use something newer? Well, in some ways, the PlayStation.

A keyboard and mouse may be the preferred input device for PC gaming, but there are others who are more comfortable with a console controller. Nowadays, although the PS4 has stolen the spotlight from the PS3, you can still get plenty of use out of your PlayStation 3 controllers.

The PS3 controller, Dualshock 3, has something the best PC controllers don't have: pressure-sensitive analog face buttons. That makes the Dualshock 3 the best choice for emulating PS2 games with PCSX2.

Then, How to use PS3 controller on PC? Please read the following content to get the guide.

How to Use PS3 Controller on PC Windows 10 (Wired Connection)

Step 1: Make sure you have these components installed:

• Microsoft .NET Framework 4.5
• Microsoft Visual C++ 2010 Redistributable Package
• Microsoft Visual C++ 2013 Runtime
• DirectX Runtime

How To Check Ps3 Controller Bluetooth Address

Step 2: Turn on your controller by pressing the stylized 'PS' button in the middle of your controller. Then, connect your PlayStation 3 controller to your PC using a Mini USB cable.

Do you know how to start Steam in offline mode properly? You may encounter some problems during this process. The post will provide you with a full guide.

Step 3: Click ScpToolkit to download it. Then, run the installer, accept the terms, choose your install location, and then you'll get a menu of all the options to install. Just leave this to the default and click Install to begin the installation.

Step 4: After about 30 seconds, ScpToolkit will be installed successfully, and you'll be required to Run Driver Installer. Then, check the boxes for the drivers you want to install. In this case, you should check 'Install Dualshock 3 driver', and then click the arrow next to 'Choose Dualshock 3 controllers to install' to open a dropdown list. From the list, check PlayStation 3 controller.

Step 5: Watch the SCP Toolkit run through its installation process. If you see 'Dualshock 3 USB Driver installed', it means a successful installation and then you can click Exit. After SCP Toolkit is installed, you can open ScpToolkit Settings Manager to change some settings like disabling rumble, adjusting analog stick deadzones, and more.

PS4 controller is blinking white? How to fix the problem? In this post, you can get 4 solution to it. Try them one by one until it is fixed.

How to Connect PS3 Controller to PC via Bluetooth (Wireless Connection)

If you want to be able to use the controller wirelessly, please follow the steps below:

Step 1: Make sure you have a Bluetooth dongle plugged in or your motherboard's Bluetooth enabled.

Step 2: You also need to install ScpToolkit. When you choose features to be installed, you should make sure the ScpToolkit Bluetooth Pair Utility option is ticked. Then, when installing drivers, you should make sure the 'Install Bluetooth driver' box is checked, then click the arrow next to 'Choose Bluetooth dongles to install' and find your Bluetooth device in the list to check it.

Step 3: If all went well, you should be able to simply unplug the controller, and after a couple seconds it will sync via Bluetooth.

This post recommends 2 PS3 internal hard drives and 2 PS3 external hard drives to you. In addition, it shows you how to replace PS3 hard drive step by step.

Want to configure manually the master address of your PS3 controller and have it automatically connect to your Raspberry Pi? It's really not that complicated and and takes only 5 minutes to configure! Here's a step-by-step guide, for macOS that is, but it will probably work for Linux as well if you take out the macOS specifics.

Prerequisites (macOS)

Have homebrew installed, if you don't have yet; follow the instructions at https://brew.sh/.

Install required libs & packages

Install libusb and libusb-compat using homebrew (or other package manager for other platforms).

Compiling sixpair binary

Next is compiling our sixpair executable, first download sixpair.c using following command.

Now we can compile sixpair.c to an executable using the following command.

If everything went well you should now have a sixpair executable.

Ps3 Controller Mac Address

Configuring Bluetooth on the Raspberry Pi

Now ssh into you Raspberry Pi (I'm using a Raspberry Pi W V1.2). Let's start by opening the bluetooth controller by running sudo bluetoothctl. This should have produced something like following output [NEW] Controller B8:27:EB:31:97:DA raspberrypi [default], my bluetooth MAC address is B8:27:EB:31:97:DA. Copy yours as we'll need it later.

Now you're in the bluetooth controller, run the following commands;

For now, just leave this window open as we'll need to connect and trust the PS3 controller in a bit. Dymo labelwriter 400 turbo driver download for mac.

Do you know how to start Steam in offline mode properly? You may encounter some problems during this process. The post will provide you with a full guide.

Step 3: Click ScpToolkit to download it. Then, run the installer, accept the terms, choose your install location, and then you'll get a menu of all the options to install. Just leave this to the default and click Install to begin the installation.

Step 4: After about 30 seconds, ScpToolkit will be installed successfully, and you'll be required to Run Driver Installer. Then, check the boxes for the drivers you want to install. In this case, you should check 'Install Dualshock 3 driver', and then click the arrow next to 'Choose Dualshock 3 controllers to install' to open a dropdown list. From the list, check PlayStation 3 controller.

Step 5: Watch the SCP Toolkit run through its installation process. If you see 'Dualshock 3 USB Driver installed', it means a successful installation and then you can click Exit. After SCP Toolkit is installed, you can open ScpToolkit Settings Manager to change some settings like disabling rumble, adjusting analog stick deadzones, and more.

PS4 controller is blinking white? How to fix the problem? In this post, you can get 4 solution to it. Try them one by one until it is fixed.

How to Connect PS3 Controller to PC via Bluetooth (Wireless Connection)

If you want to be able to use the controller wirelessly, please follow the steps below:

Step 1: Make sure you have a Bluetooth dongle plugged in or your motherboard's Bluetooth enabled.

Step 2: You also need to install ScpToolkit. When you choose features to be installed, you should make sure the ScpToolkit Bluetooth Pair Utility option is ticked. Then, when installing drivers, you should make sure the 'Install Bluetooth driver' box is checked, then click the arrow next to 'Choose Bluetooth dongles to install' and find your Bluetooth device in the list to check it.

Step 3: If all went well, you should be able to simply unplug the controller, and after a couple seconds it will sync via Bluetooth.

This post recommends 2 PS3 internal hard drives and 2 PS3 external hard drives to you. In addition, it shows you how to replace PS3 hard drive step by step.

Want to configure manually the master address of your PS3 controller and have it automatically connect to your Raspberry Pi? It's really not that complicated and and takes only 5 minutes to configure! Here's a step-by-step guide, for macOS that is, but it will probably work for Linux as well if you take out the macOS specifics.

Prerequisites (macOS)

Have homebrew installed, if you don't have yet; follow the instructions at https://brew.sh/.

Install required libs & packages

Install libusb and libusb-compat using homebrew (or other package manager for other platforms).

Compiling sixpair binary

Next is compiling our sixpair executable, first download sixpair.c using following command.

Now we can compile sixpair.c to an executable using the following command.

If everything went well you should now have a sixpair executable.

Ps3 Controller Mac Address

Configuring Bluetooth on the Raspberry Pi

Now ssh into you Raspberry Pi (I'm using a Raspberry Pi W V1.2). Let's start by opening the bluetooth controller by running sudo bluetoothctl. This should have produced something like following output [NEW] Controller B8:27:EB:31:97:DA raspberrypi [default], my bluetooth MAC address is B8:27:EB:31:97:DA. Copy yours as we'll need it later.

Now you're in the bluetooth controller, run the following commands;

For now, just leave this window open as we'll need to connect and trust the PS3 controller in a bit. Dymo labelwriter 400 turbo driver download for mac.

Configuring bluetooth master address for the PS3 controller

Let's connect the PS3 controller to your Mac. Now we can pair the PS3 controller with the sixpair binary we compiled earlier and the bluetooth MAC address we retrieved in the previous step. To do this, run ./sixpair B8:27:EB:31:97:DA (substitute the MAC address with the one your Raspberry Pi outputted). This command will procude something similar as below.

Connecting the PS3 controller to the Raspberry Pi

Disconnect the PS3 controller from your Mac and head back to the Raspberry Pi terminal. Power on the PS3 controller and you will see that it tries to connect to the Raspberry Pi in the terminal.

Copy the MAC address of the PS3 controller, in this case 00:1B:FB:2F:59:49. After the PS3 controller turned off prepare the following command in the terminal (as you will need to be quick) connect 00:1B:FB:2F:59:49. Next power on the PS3 controller again and once you see the line [NEW] Device 00:1B:FB:2F:59:49 00-1B-FB-2F-59-49 appearing in the terminal immediately execute the command. If all went well you should see something like the following.

Now we need to trust the MAC address by running trust 00:1B:FB:2F:59:49. Normally you should see the following output, and the PS3 controller will be connected to your Raspberry Pi.

Ps3 Controller Address Change

You can now exit the bluetooth controller by running quit. To turn off the PS3 controller, hold the menu button for 10 seconds. Now when you turn on again the PS3 controller it will automatically connect to your Raspberry Pi.

Ps3 Controller Address Labels

And that's about it! 😎🚀